Feature

Cage trapping the fox

Trap size and siting can make all the difference when a fox starts helping itself to poultry. Mike Powell draws on years of trial and error to explain where cages earn their keep.

Lead photograph for Cage trapping the fox

It has to be said that, over the years I’ve pitted my wits against foxes causing people grief and expense, cage trapping has never really been top of my list as the most successful way of coming to terms with our top predator. This is possibly down to the fact that, generally, I prefer to shoot them rather than endeavour to trap them. Trapping can be a little indiscriminate, and I prefer the challenge of actually dealing with the fox I’m after rather than the impersonal method of trapping.

Having said that, there are occasions when shooting is not feasible and cage trapping may be the only practical option. So, in this article, I will endeavour to set out the methods I find do work and those that don’t.

Size matters

Firstly, as in so many things in life, size matters! Unfortunately, many commercially available cage traps are just too small. Foxes are naturally wary of entering a small, confined space, especially when it’s made of an alien material such as wire netting or weldmesh.

It is possible that you will catch the odd cub, but adults are very difficult to catch in an undersized cage for two reasons. The first, as I’ve already mentioned, is their reluctance to enter a small trap. The second is the way they approach the bait, stretching their necks out as far as they can to grab it. Quite often, when the release mechanism is triggered, the drop-down door comes down on the fox’s back end and it retreats at high speed!

Even a simple Larsen trap will often catch cubs
Even a simple Larsen trap will often catch cubs

This happens quite often. Cubs, being smaller and not so wary, will sometimes be caught because they go right into the trap. So it really is essential to get the biggest trap you can.

Over the years, I’ve come across just two or three really big, homemade traps that have been extremely successful. One measured about two metres by two and a half, and another was even bigger. A good friend, now sadly departed, and I constructed a very efficient trap out of two gabions, the sort used in road construction. To date, it has caught approaching 30 foxes.

This type of cage trap is designed to be set up in one place and left there permanently, as it is too big to just pick up and move about. If placed against a hedge, it will soon get grown over with bramble and other growth and become part of the scenery.

Should you decide to build a large cage trap, give some thought to where it will be located. The most successful cages in my experience have been those in situ for years. As I said before, these acquire natural camouflage and, once they start catching, fox scent will be in and around them. Clearly, these larger traps are most suitable where poultry in particular are kept in one location.

Setting a cage trap in cover is bonus if the terrain and situation allows
Setting a cage trap in cover is bonus if the terrain and situation allows

Part of the scenery

Foxes today are, by and large, increasingly drawn to areas where humans are. This is unlike the time when I started out, when farmyards and smallholdings, although attractive to foxes, were treated with great respect. Today, in many cases, humans are looked upon as a source of an easy meal, with no great risk involved.

I’ve never found that setting cage traps out in open country works very well. Understandably, a fox would find a metal construction in a field totally alien. I have caught the odd one in such a setting, but it really has been very rare.

There is one exception, and that is what I call the American way of cage trapping. I think it’s fair to say that our friends across the Atlantic are, in the main, far more expert at trapping animals than we are. Perhaps the sheer size of the country, with more space to set traps away from disturbance or interference, has something to do with it.

Studying their way of trapping whilst visiting the USA some years ago prompted me to have a go at setting disguised traps. The whole idea is to present the quarry with a natural-looking hole in a hedge or bank to investigate. It would be wrong to say I had phenomenal success, but I did catch foxes in situations where I never had before. Admittedly, some were cubs, but I caught some adults too.

A hole in the hedge

The method I used was to get hold of the largest manageable cage trap I could find and place it in a thick, black dustbin liner. The next step was to find a spot where foxes were likely to travel, with plenty of hedgerow cover.

The cage, in its bin liner, was tucked into the undergrowth, ensuring it was completely stable. No animal is likely to enter a trap if it rocks about. The floor needs to be covered with earth or general litter and made to look as natural as possible.

Mike’s finished fox catching masterpiece
Mike’s finished fox catching masterpiece

I gave the trap a week or so to allow the undergrowth to settle around it, then baited it with rabbit; I usually slit the belly open and left the guts in. Again, the fox would be more likely to explore the scent of something it was expecting and could well fight shy of, say, a chicken.

I partially covered the entrance with growing herbage until there was just a fairly small, dark hole left, and that was it. The set trap really didn’t look like a trap, more like a hole in the undergrowth, with the bin liner keeping the interior dark. This type of set-up is the only one I’ve found works fairly well in open country.

Around the poultry run

Whilst, as I said earlier, I’ve only had limited success with cage traps, there is one area where they really can work well: around poultry where foxes have been causing problems. Clearly, a trap constructed of weldmesh or similar blends in far better where there are wire-netting chicken runs and the usual detritus that poultry keeping always seems to attract.

The trap we made from two gabions was very successful, mainly down to its size
The trap we made from two gabions was very successful, mainly down to its size

Again, the bigger the trap the better. Setting it alongside and against existing runs, preferably baited with a dead chicken, can often get results, particularly where a fox returns to pick up the remains from a previous visit. This often happens the night after a raid, so that is the obvious time to set the trap.

Always ensure the bait is as far back in the trap as possible, to prevent the fox reaching in and triggering it whilst its back end is still outside!

It’s not a bad idea to leave a cage trap in situ, even if you don’t bait and set it all the time. To any foxes visiting the area, it will become part and parcel of the scenery and, because of that, is far more likely to catch when it is baited and set.

Perhaps the most productive time to catch foxes is from July through to the end of August, when cubs are on the hunt for the first time. They really can be quite destructive at this stage and, being relatively small, can gain access to places that would normally be inaccessible to adults.

They are also still learning the tricks of the trade and are not nearly as wary as adults. I know that, when I was keepering, cubs could on occasion get through the commercial fox guards. Every year, cubs are caught in Larsen traps, but it isn’t long before they become way-wise and join the ranks of their elders.

A place in the armoury

As far as bait is concerned, almost anything works for the omnivorous fox. Clearly, if trapping around poultry, a dead bird makes the best bait, but, as mentioned earlier, I’ve always found that an opened-up rabbit takes a bit of beating. Cage trapping never guarantees success, but it does have a place in the fox controller’s armoury.

This fox was a regular visitor to the muck heap
This fox was a regular visitor to the muck heap

A word of caution: legislation governs the use of traps, and requirements differ across the UK, so study exactly what your obligations are before setting one. Cage traps should be checked at least once a day to prevent a captured fox or non-target animal suffering. Choose your trapping sites with care, too. In these times, when it can seem that almost everyone has a downer on shooting, trapping and the like, it pays to keep them well away from prying eyes.

This is a perhaps the ideal trap size when it comes to capturing the culprit
This is a perhaps the ideal trap size when it comes to capturing the culprit

Snaring is already banned in Wales and Scotland. Whatever your views on snaring, there’s no doubt in my mind that, when done properly, it is a very effective way of keeping fox numbers under control. Where it is no longer permitted, cage trapping remains one of the few options available.

One final point: I’ve heard many times over the years that cage traps, when first set out, should be left open for foxes to get used to entering them. This makes no sense to me at all, as you only want a fox to go into a trap once. Apart from allowing the undergrowth to settle around a disguised trap, I’ve always put them in position, baited and set them from the word go, then hoped for the best!

Article by Mike Powell